Industries Benefited
Software Packages
Technical Reports
Case Studies
Technical Services
Training Courses
Modeling and Simulation
Cement Processes
Data Correlation
Particle Size Analysis
Classifier Analysis
Ball Mill Simulation
Rotary Dryer Simulation
Image Analysis
Offers and Prices
Papers Published
Contact Us


Click here to download Word document containing all the lecture titles, as a .ZIP file: 13 kb.  

Training Courses

We offer eight Technology Training Courses (TTC):

No. Course Name Duration Fees, USD
TTC-1 Mathematical Modeling and Simulation for Process Optimisation 16 days  1,500
TTC-2 Methods for Analysis and  Optimisation of Process Parameters in Cement Industry 8 days  1,000
TTC-3 Data Analysis and Correlation Techniques: Industrial Benefits and Sale Forecasting 4 days  700
TTC-4 Fundamentals of Particle Size Analysis, Measurement and Analysis Techniques 4 days  700
TTC-5 Fundamentals of Classifier Operation and Optimisation 2 days  500
TTC-6 Ball Mill Circuit Operation, Simulation, Optimisation and Industrial Case Studies 4 days  700
TTC-7 Rotary Dryer Circuit Operation, Simulation, Optimisation and Industrial Case Studies 4 days  700
TTC-8 Image Analysis Techniques for Microscopy and Particle Shape Characterization 4 days  700

The following general terms and conditions are common to all the above courses:

  • Each lecture will be roughly of 1.5 hours duration. There will be 3-4 lectures per day.

  • Detailed notes will be given to each participant.

  • Computers, operating systems and compilers for programming languages will not be supplied.

  • Wherever possible, the lectures will be supplemented with demonstration of actual technology softwares developed by PTC.  But, none of these softwares themselves will be supplied as part of the course.

  • Minimum number of participants required is 20.

  • 100% of the course fees shall be payable in advance with order.

  • Please send the payment only if your organisation itself is prepared to sponsor at least 20 participants.  In case you are interested in sponsoring only fewer (than 20) number of participants, only inform us and DO NOT SEND THE PAYMENT immediately.  The course(s) will be conducted only upon our receiving confirmation for a total of 20 participants.

  • The course(s) can be conducted at Delhi or at your plant or office premises.

  • In case of our conducting the course(s) at your plant or office premises, then: 

    • To-and-fro charges by air for 2 persons shall be borne by you.

    • Local conveyance and all out-of-pocket expenses shall be reimbursed on actuals.

    • Boarding and lodging for 2 persons at site shall be borne by you.

  • All payments shall be made in favour of "M/s. Particle Technology Consultants" in the form of demand draft and drawn on any bank in New Delhi or by Bank Transfer directly into our Current Account No. 325 with Punjab National Bank, East of Kailash Branch, New Delhi.

  • This offer is valid for your acceptance till 30th September 2007.

At the end of each course, your engineers/scientists would be in a position to develop simulation programs for optimising specific processes in your plant.

Who All Can Benefit

  • Process engineers and process managers

  • Production and quality control personnel

  • Technical services personnel

  • Design and development engineers

  • Engineers/scientists engaged in R&D

  • Software professionals working in software companies

The participants should have an analytical bent of mind and reasonable mathematical ability.  Persons possessing love for maths would be ideal candidates.  Prior knowledge of computer programming is not essential although it may be helpful for a better appreciation of the various courses.

Address :  Dr. K. Viswanathan, B-113/2 East of Kailash, New Delhi 110065, INDIAPh : 91 11  26830345, Mob: 9818803624.   
  Email:  ptcsoftware@softhome.net, ptcsoftware@rediffmail.com.