| Lecture 1- |
One Feed-Two Product (Ball
Mill Circuit) and Two Feed-Two Product (Roller Mill Circuit)
Cases. Recycle Load (ratio of coarse to fines flow rates)
Estimation |
| Lecture 2- |
Inherent Inconsistencies due
to Sampling and Measurement Errors in "Raw Data" of
PSDs Around Classifier. Lagrangian Technique to Obtain
"Corrected" PSDs |
| Lecture 3- |
Estimation of Tromp Efficiency
Curve. Tromp vs. Ideal Tromp. Recovery Efficiencies |
| Lecture 4- |
Mathematical Equation for
Tromp Curve. Overall Circulating Load (R), Direct Bypass Fraction (Rf),
Cut-particle Diameter (d50), Sharpness Index of Cut (SI)
and Their Estimation
by Regression Technique |
| Lecture 5- |
Effect of Air Ventilation on Recycle Load in Dry Grinding Circuits. Mathematical Model
for the same. |
| Lecture 6- |
Industrial Case Studies
Indicating Benefits Derived |
| Lecture 7- |
Demonstration of CLASANAL
Software |